2.3 HP 10000 Series Racks
The HP 10000 Series racks (see
inches) or 22U (43.838 inches) high, depending on the configuration requirements. The HP 10000
Series racks house the components on industry-standard 19-inch wide rails. The HP 10000 Series
racks have interchangeable perforated front and rear doors, a set of side panels for each row of
bayed racks, and can have up to four PDUs.
in
Figure 2-4
Figure 2-4 42U HP 10000 Series Rack
1
Table 2-3 HP Rack 10000 Series Rack Callouts and Dimensions
Callout Numbers — Descriptions
1 — Rack width (with side panels)
2 — Rack height
3 — Foot width
4 — Foot depth
5 — Rotating Casters
6 — Leveling Foot
2.3.1 HP Rack 10000 Series Wide Cabinet
For cluster configurations using the 288-port Voltaire InfiniBand interconnect, an HP 10000 Series
42U, 800 mm wide cabinet is required (see
28
Platform Core Components
Figure
of the racks used in HP Cluster Platform configurations.
2
22U
612.77 mm
1113.48 mm
535.3 mm
885.3 mm
Quantity four (4)
Quantity four (4)
2-4) used in HP Cluster Platform are either 42U (78.838
Table 2-3
lists the callouts and dimensions shown
3
6
5
42U
612.77 mm
2002.50 mm
535.3 mm
885.3 mm
Figure
2-4and
Table
4
42U Wide Cabinet (See
Section
2.3.1)
815.47 mm
2002.50 mm
735.3 mm
885.3 mm
2-3). The added width allows