Ipv6 Pim Configuration Examples; Ipv6 Pim-Dm Configuration Example - HP 6125XLG Configuration Manual

Task
Display IPv6 PIM routing table
information.
Display RP information in the IPv6
PIM-SM domain.

IPv6 PIM configuration examples

IPv6 PIM-DM configuration example

Network requirements
VOD streams are sent to receiver hosts in multicast. The receiver groups of different organizations form
stub networks, and one or more receiver hosts exist in each stub network. The entire IPv6 PIM domain is
operating in the dense mode.
Host A and Host C are multicast receivers in two stub networks N1 and N2.
MLDv1 runs between Switch A and N1 and between Switch B, Switch C, and N2.
Figure 53 Network diagram
Table 10 shows the interface and IPv6 address assignment, and network topology scheme.
Command
display ipv6 pim routing-table [ ipv6-group-address [ prefix-length ] |
ipv6-source-address [ prefix-length ] | flags flag-value | fsm |
incoming-interface interface-type interface-number | mode mode-type |
outgoing-interface { exclude | include | match } interface-type
interface-number ] *
display ipv6 pim rp-info [ ipv6-group-address ]
162