HP 6125XLG Configuration Manual page 92

<SwitchA> system-view
[SwitchA] multicast routing-enable
[SwitchA] interface vlan-interface 100
[SwitchA-Vlan-interface100] igmp enable
[SwitchA-Vlan-interface100] pim dm
[SwitchA-Vlan-interface100] quit
[SwitchA] interface vlan-interface 103
[SwitchA-Vlan-interface103] pim dm
[SwitchA-Vlan-interface103] quit
# Enable IP multicast routing, IGMP, and PIM-DM on Switch B and Switch C in the same way.
(Details not shown.)
# On Switch D, enable IP multicast routing, and enable PIM-DM on each interface.
<SwitchD> system-view
[SwitchD] multicast routing-enable
[SwitchD] interface vlan-interface 300
[SwitchD-Vlan-interface300] pim dm
[SwitchD-Vlan-interface300] quit
[SwitchD] interface vlan-interface 103
[SwitchD-Vlan-interface103] pim dm
[SwitchD-Vlan-interface103] quit
[SwitchD] interface vlan-interface 101
[SwitchD-Vlan-interface101] pim dm
[SwitchD-Vlan-interface101] quit
[SwitchD] interface vlan-interface 102
[SwitchD-Vlan-interface102] pim dm
[SwitchD-Vlan-interface102] quit
Verifying the configuration
# Display PIM information on Switch D.
[SwitchD] display pim interface
Interface
Vlan300
Vlan103
Vlan101
Vlan102
# Display PIM neighboring relationships on Switch D.
[SwitchD] display pim neighbor
Total Number of Neighbors = 3
Neighbor
192.168.1.1
192.168.2.1
192.168.3.1
Assume that Host A needs to receive the information addressed to multicast group 225.1.1.1. After
multicast source 10.1 10.5.100/24 sends multicast packets to the multicast group, an SPT is established
through traffic flooding. Switches on the SPT path (Switch A and Switch D) have their (S, G) entries. Host
A sends an IGMP report to Switch A to join the multicast group G, and a (*, G) entry is generated on
NbrCnt HelloInt
0 30
1 30
1 30
1 30
Interface
Vlan103
Vlan101
Vlan102
DR-Pri DR-Address
1 10.110.5.1
1 192.168.1.2
1 192.168.2.2
1 192.168.3.2
Uptime Expires Dr-Priority
00:02:22 00:01:27 1
00:00:22 00:01:29 3
00:00:23 00:01:31 5
85
(local)
(local)
(local)
(local)