HP 6125XLG Configuration Manual page 91

Figure 32 Network diagram
Source
10.110.5.100/24
Table 6 shows the interface and IP address assignment, and network topology scheme.
Table 6 Interface and IP address assignment
Device
Switch A
Switch A
Switch B
Switch B
Switch C
Switch C
Switch D
Switch D
Switch D
Switch D
Configuration procedure
1. Configure the IP address and subnet mask for each interface as per
2. Configure OSPF on the switches in the PIM-DM domain to make sure they are interoperable at the
network layer and routing information among the switches can be dynamically updated. (Details
not shown.)
3. Enable IP multicast routing, IGMP, and PIM-DM:
# On Switch A, enable IP multicast routing, enable IGMP on VLAN-interface 100, and enable
PIM-DM on each interface.
Vlan-int300 Vlan-int101
Switch D
PIM-DM
Interface
VLAN-interface 100
VLAN-interface 103
VLAN-interface 200
VLAN-interface 101
VLAN-interface 200
VLAN-interface 102
VLAN-interface 300
VLAN-interface 103
VLAN-interface 101
VLAN-interface 102
Switch A
Vlan-int100
Vlan-int200
Vlan-int101
Switch B
Vlan-int200
Switch C
84
Receiver
Host A
Host B
Receiver
Host C
Host D
IP address
10.110.1.1/24
192.168.1.1/24
10.110.2.1/24
192.168.2.1/24
10.110.2.2/24
192.168.3.1/24
10.110.5.1/24
192.168.1.2/24
192.168.2.2/24
192.168.3.2/24
Figure 32. (Details not shown.)