Qos Wrr - HP 6125G Command Reference Manual

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display qos wrr interface to display the weighted round robin (WRR) queuing configuration on an
interface.
If no interface is specified, this command displays the WRR queuing configuration of all the interfaces.
Related commands: qos wrr.
Examples
# Display the WRR queuing configuration of GigabitEthernet 1/0/1.
<Sysname> display qos wrr interface GigabitEthernet 1/0/1
Interface: GigabitEthernet1/0/1
Output queue: Weighted round robin queue
Queue ID
-------------------------------------
0
1
2
3
4
5
6
7
Table 28 Command output
Field
Interface
Output queue
Queue ID
Group
Weight

qos wrr

Syntax
qos wrr [ byte-count | weight ]
Group Weight
1 1
sp N/A
1 3
1 4
1 5
1 6
1 7
1 8
Description
Interface type and interface number.
Pattern of the current output queue.
ID of a queue.
Number of the group a queue is assigned to:
•
1—WRR group
•
sp—SP group
Queue weight based on which queues are scheduled. N/A indicates that the queue
uses the SP queue scheduling algorithm.
76