Filter - HP 6125G Command Reference Manual

Table 16 Command output
Field
User Defined Behavior Information
Behavior
Marking
Remark
Accounting enable
Committed Access Rate
Green Action
Red Action
Redirect enable
Redirect type
Redirect destination

filter

Syntax
filter { deny | permit }
undo filter
View
Traffic behavior view
Default level
2: System level
Parameters
deny: Drops packets.
permit: Permits packet to pass through.
Description
Use filter to configure a traffic filtering action in a traffic behavior.
Use undo filter to delete the traffic filtering action.
Examples
# Configure the traffic filtering action as deny in the traffic behavior database.
Description
User-defined behavior information.
Traffic behavior name.
Information about traffic marking.
Type of precedence marked for traffic, which can be
DSCP, IP precedence, dot1p (COS), qos local ID,
local precedence, drop precedence, customer VLAN
ID or service VLAN ID. For more information about
these precedence types, see
configuration commands."
Class-based accounting mode, in packets or in bytes.
Information about the CAR action.
Action to take on green packets, which can be pass or
discard.
Action to take on red packets, which can be pass or
discard.
Traffic redirecting configuration.
Traffic redirecting type, which can be redirecting
traffic to the CPU, an interface, or the next hop.
Destination for traffic redirecting, which can be an
interface name, the next hop IP address, or the CPU.
45
"Traffic behavior