Congestion Management Configuration Task List; Configuring Sp Queuing; Configure Wrr Queuing - HP 5830 Series Configuration Manual

Congestion management configuration task list

Task

Configuring SP queuing

Configure WRR queuing

Configuring WFQ queuing
Configuring SP+WRR queuing
Configuring SP+WFQ queuing
Configuring SP queuing
Step
1. Enter system view.
2. Enter interface view.
3. Configure SP queuing.
4. Display SP queuing
configuration.
For example, configure GigabitEthernet 1/0/1 to use SP queuing:
# Enter system view.
<Sysname> system-view
# Configure GigabitEthernet1/0/1 to use SP queuing.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos sp
Configure WRR queuing
Step
1. Enter system view.
2. Enter interface view.
Command
system-view
interface interface-type
interface-number
qos sp
display qos sp interface
[ interface-type interface-number ]
[ | { begin | exclude | include }
regular-expression ]
Command
system-view
interface interface-type
interface-number
43
Remarks
Perform one of the tasks as needed.
Remarks
N/A
N/A
The default queuing algorithm on an
interface is SP queuing.
Optional.
Available in any view.
Remarks
N/A
N/A