HP 6125G Command Reference Manual page 85

Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display qos wfq interface to display the weighted fair queuing (WFQ) configuration on an interface.
If no interface is specified, this command displays the WFQ configuration of all the interfaces.
Related commands: qos wfq.
Examples
# Display the WFQ configuration of GigabitEthernet 1/0/1.
<Sysname> display qos wfq interface gigabitethernet 1/0/-1
Interface: GigabitEthernet1/0/1
Output queue: Hardware Weighted Fair Queue queuing
Queue ID
----------------------------------------------------------------
0
1
2
3
4
5
6
7
Table 29 Command output
Field
Interface
Output queue
Queue ID
Byte-count
Min-Bandwidth
Byte-count Min-Bandwidth
1 64
NA 64
1 64
1 64
1 64
1 64
1 64
1 64
Description
Interface type and interface number.
Pattern of the current output queue.
ID of a queue.
Scheduling weight of the queue in byte-count WFQ,
which assigns bandwidth to queues in terms of bytes.
If you enable packet-based WFQ on the interface, this
field is replaced with Weight. For queues in the SP
group, NA is displayed.
Minimum guaranteed bandwidth.
80