Congestion Management Configuration Commands; Sp Queuing Configuration Commands; Display Qos Sp - HP 6125G Command Reference Manual

Congestion management configuration
commands

SP queuing configuration commands

display qos sp

Syntax
display qos sp interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display qos sp interface to view the strict priority (SP) queuing configuration of an interface.
If no interface is specified, this command displays the SP queuing configuration of all the interfaces.
Related commands: qos sp.
Examples
# Display the SP queuing configuration of GigabitEthernet 1/0/1.
<Sysname> display qos sp interface GigabitEthernet 1/0/1
Interface: GigabitEthernet1/0/1
Output queue: Strict-priority queue
Table 27 Command output
Field
Interface
Output queue
Description
Interface type and interface number.
Pattern of the current output queue.
74