Acl Copy - HP 6125G Command Reference Manual

[Sysname] acl number 2000
[Sysname-acl-basic-2000]
# Create IPv4 basic ACL 2001 with the name flow, and enter its view.
<Sysname> system-view
[Sysname] acl number 2001 name flow
[Sysname-acl-basic-2001-flow]

acl copy

Syntax
acl copy { source-acl-number | name source-acl-name } to { dest-acl-number | name dest-acl-name }
View
System view
Default level
2: System level
Parameters
source-acl-number: Specifies an existing source ACL by its number:
• 2000 to 2999 for IPv4 basic ACLs
3000 to 3999 for IPv4 advanced ACLs
•
4000 to 4999 for Ethernet frame header ACLs
•
name source-acl-name: Specifies an existing source ACL by its name. The source-acl-name argument
takes a case-insensitive string of 1 to 63 characters.
dest-acl-number: Assigns a unique number to the ACL you are creating. This number must be from the
same ACL category as the source ACL. Available value ranges include:
2000 to 2999 for IPv4 basic ACLs
•
3000 to 3999 for IPv4 advanced ACLs
•
• 4000 to 4999 for Ethernet frame header ACLs
name dest-acl-name: Assigns a unique name to the ACL you are creating. The dest-acl-name takes a
case-insensitive string of 1 to 63 characters. It must start with an English letter and to avoid confusion,
cannot be all. For this ACL, the system automatically picks the smallest number from all available
numbers in the same ACL category as the source ACL.
Description
Use acl copy to create an IPv4 or an Ethernet frame header ACL by copying an ACL that already exists.
The new ACL has the same properties and content as the source ACL, but not the same ACL number and
name.
You can assign a name for an ACL only when you create it. After an ACL is created with a name, you
cannot rename it or remove its name.
Examples
# Create IPv4 basic ACL 2002 by copying IPv4 basic ACL 2001.
<Sysname> system-view
[Sysname] acl copy 2001 to 2002
2