Qos Apply Policy Global - HP 6125G Command Reference Manual

undo qos apply policy [ policy-name ] { inbound | outbound }
View
User profile view
Default level
2: System level
Parameters
inbound: Applies the QoS policy to the traffic sent by the online users.
outbound: Applies the QoS policy to the traffic received by the online users.
policy-name: Policy name, a string of 1 to 31 characters.
Description
Use qos apply policy to apply a QoS policy to a user profile.
Use undo qos apply policy to remove the QoS policy.
If a user profile is activated, the QoS policy, including the ACLs referenced in the QoS policy, applied to
it cannot be configured or removed.
The QoS policy applied to a user profile takes effect when the user-profile is activated and the users are
online.
Only the remark, car, and filter actions are supported in the QoS policies applied in user profile view.
A null policy cannot be applied in user profile view.
Examples
# Apply policy test to the traffic sent by the users online. (Assume that that the QoS policy has been
configured.)
<Sysname> system-view
[Sysname] user-profile user
[Sysname-user-profile-user] qos apply policy test inbound

qos apply policy global

Syntax
qos apply policy policy-name global { inbound | outbound }
undo qos apply policy [ policy-name ] global { inbound | outbound }
View
System view
Default level
2: System level
Parameters
policy-name: Policy name, a string of 1 to 31 characters.
inbound: Applies the QoS policy to the incoming packets on all ports.
outbound: Applies the QoS policy to the outgoing packets on all ports.
60