Display Traffic Behavior - HP 6125G Command Reference Manual

display traffic behavior

Syntax
display traffic behavior user-defined [ behavior-name ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
user-defined: Displays user-defined traffic behaviors.
behavior-name: Behavior name, a string of 1 to 31 characters. If no traffic behavior is specified, this
command displays information about all the user-defined behaviors.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display traffic behavior to display traffic behavior information.
Examples
# Display user-defined traffic behaviors.
<Sysname> display traffic behavior user-defined
User Defined Behavior Information:
Behavior: 2
Accounting enable: byte
Committed Access Rate:
CIR 12800 (kbps), CBS 40960 (byte), EBS 4000 (byte)
Green Action: pass
Red Action: discard
Yellow Action: pass
Redirect enable:
Redirect type: cpu
Redirect destination: cpu
Marking:
Remark dot1p COS 1
Marking:
Remark DSCP af12
44