HP 6125G Command Reference Manual page 30

protocol: Matches protocol carried over IPv6. It can be a number in the range of 0 to 255, or in words,
gre (47), icmpv6 (58), ipv6, ipv6-ah (51), ipv6-esp (50), ospf (89), tcp (6), or udp (17).
describes the parameters that you can specify regardless of the value that the protocol argument takes.
Table 10 Match criteria and other rule information for IPv6 advanced ACL rules
Parameters
source { source
source-prefix |
source/source-prefix |
any }
destination { dest
dest-prefix |
dest/dest-prefix | any }
counting
dscp dscp
flow-label
flow-label-value
routing [ type
routing-type ]
fragment
time-range
time-range-name
Function
Specifies a source IPv6 address
Specifies a destination IPv6
address
Counts the number of times the
IPv6 ACL rule has been matched
in hardware
Specifies a DSCP preference
Specifies a flow label value in
an IPv6 packet header
Specifies the type of routing
header
Applies the rule to only non-first
fragments
Specifies a time range for the
rule
25
Description
The source and source-prefix arguments
represent an IPv6 source address, and prefix
length in the range of 1 to 128.
The any keyword represents any IPv6 source
address.
The dest and dest-prefix arguments represent a
destination IPv6 address, and prefix length in
the range of 1 to 128.
The any keyword specifies any IPv6 destination
address.
—
The dscp argument can be a number in the
range of 0 to 63, or in words, af11 (10), af12
(12), af13 (14), af21 (18), af22 (20), af23
(22), af31 (26), af32 (28), af33 (30), af41
(34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3
(24), cs4 (32), cs5 (40), cs6 (48), cs7 (56),
default (0), or ef (46).
The flow-label-value argument is in the range of
0 to 1048575.
The routing-type argument takes a value in the
range of 0 to 255.
If no routing type header is specified, the rule
applies to the IPv6 packets that have any type of
routing header.
Without this keyword, the rule applies to all
fragments and non-fragments.
The time-range-name argument takes a
case-insensitive string of 1 to 32 characters. It
must start with an English letter. If the time range
is not configured, the system creates the rule;
however, the rule using the time range can take
effect only after you configure the timer range.
Table 10