|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display qos policy to display user-defined QoS policy configuration information.
Examples
# Display the configuration information of user-defined QoS policies.
<Sysname> display qos policy user-defined
User Defined QoS Policy Information:
Policy: test
Classifier: 1
Behavior: be
-none-
Classifier: USER1
Behavior: USER1
Committed Access Rate:
CIR 256 (kbps), CBS 15000 (byte), EBS 0 (byte)
Green Action: pass
Red
Marking:
Remark IP Precedence 3
Remark dot1p COS 2
Table 18 Command output
Field
Policy
Classifier
Behavior
display qos policy global
Syntax
display qos policy global [ slot slot-number ] [ inbound | outbound ] [ | { begin | exclude | include }
regular-expression ]
Action: discard
Description
Policy name.
Class name.
A policy can have multiple classes, and each class is associated with a traffic
behavior. A class can have multiple match criteria. For more information, see the
traffic classifier command in
Behavior associated with the class. A behavior specifies a set of actions to take on
the traffic that matches the associated class. For more information, see the traffic
behavior command in
"Class configuration
"Traffic behavior configuration
53
commands."
commands."