Configuration Procedure; Priority Mapping Table And Priority Marking Configuration Example; Network Requirements - HP 6125G Configuration Manual

Configuration procedure

# Assign port priority to GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2. Make sure that the priority
of GigabitEthernet 1/0/1 is higher than that of GigabitEthernet 1/0/2, and no trusted packet priority
type is configured on GigabitEthernet 1/0/1 or GigabitEthernet 1/0/2.
<DeviceC> system-view
[DeviceC] interface gigabitethernet 1/0/1
[DeviceC-GigabitEthernet1/0/1] qos priority 3
[DeviceC-GigabitEthernet1/0/1] quit
[DeviceC] interface gigabitethernet 1/0/2
[DeviceC-GigabitEthernet1/0/2] qos priority 1
[DeviceC-GigabitEthernet1/0/2] quit
Priority mapping table and priority marking
configuration example

Network requirements

As shown in
The network is described as follows:
• The marketing department connects to GigabitEthernet 1/0/1 of Device, which sets the 802.1p
priority of traffic from the marketing department to 3.
The R&D department connects to GigabitEthernet 1/0/2 of Device, which sets the 802.1p priority
•
of traffic from the R&D department to 4.
• The management department connects to GigabitEthernet 1/0/3 of Device, which sets the 802.1p
priority of traffic from the management department to 5.
Configure port priority, 802.1p-to-local mapping table, and priority marking to implement the plan as
described in
Table 3 Configuration plan
Traffic
destination
Public servers
Internet
Figure 8, the company's enterprise network interconnects all departments through Device.
Table 3.
Traffic priority order
R&D department >
management
department > marketing
department
Management
department > marketing
department > R&D
department
Queuing plan
Traffic source
R&D department
Management department
Marketing department
R&D department
Management department
Marketing department
29
Output Queue
queue priority
6 High
4 Medium
2 Low
2 Low
6 High
4 Medium