Snmp Logging Configuration Example - HP 6125G Configuration Manual

Request binding:
1: 1.3.6.1.2.1.11.29.0
Response binding:
1: Oid=snmpOutTraps.0 Syntax=CNTR32 Value=18
Get finished
# Try to get the device name from the agent. The get attempt fails because the NMS has no access
right to the node.
Send request to 1.1.1.1/161 ...
Protocol version: SNMPv3
Operation: Get
Request binding:
1: 1.3.6.1.2.1.1.5.0
Response binding:
1: Oid=sysName.0 Syntax=noSuchObject Value=NULL
Get finished
# Execute the shutdown or undo shutdown command on an idle interface on the agent. You can
see the interface state change traps on the NMS:
1.1.1.1/3374 V3 Trap = linkdown
SNMP Version = V3
Community = managev3user
Command = Trap
1.1.1.1/3374 V3 Trap = linkup
SNMP Version = V3
Community = managev3user
Command = Trap

SNMP logging configuration example

Network requirements
Configure the SNMP agent (1.1.1.1/24) in
Figure 26 Network diagram
Configuration procedure
This example assumes you have configured all required SNMP settings for the NMS and the agent (see
"SNMPv1/SNMPv2c configuration
Figure 26 to log the SNMP operations performed by the NMS.
example" or "SNMPv3 configuration
64
example").