System Information Format - HP 6125G Configuration Manual

Output
destination
Log buffer
SNMP
module
Web
interface

System information format

The following shows the original format of system information, which might be different from what you see.
The actual format depends on the log resolution tool you use.
Formats
The system information format depends on the output destinations, as shown in
Table 4 System information formats
Output destination
Console, monitor
terminal, logbuffer,
trapbuffer, SNMP
module
Log host
The closing set of angel brackets (< >), the space, the forward slash (/), and the colon (:) are all required
in the above format.
Following is a detailed explanation of the fields involved in system information:
LOG
Modules
Enabled/
allowed
disabled
default (all
Enabled
modules)
default (all
Disabled
modules)
default (all
Enabled
modules)
Format
timestamp sysname
module/level/digest: content
•
HP format:
<PRI>timestamp
Sysname %%vvmodule/level
/digest: source content
•
UNICOM format:
<PRI>timestamp Sysname
vvmodule/level/serial_numb
er: content
TRAP
Enabled/
Severity
disabled
Informa-
Disabled
tional
Debug Enabled
Debug Enabled
Example
%Jun 26 17:08:35:809 2011 Sysname
SHELL/4/LOGIN: VTY login from 1.1.1.1
•
HP format:
<189>Oct 9 14:59:04 201
MyDevice %%10SHELL/5/SHELL_LOGIN(l):
VTY logged in from 192.168.1.21
•
UNICOM format:
37
DEBUG
Enabled/
Severity
disabled
Debug Disabled
Informatio
Disabled
nal
Debug Disabled
Table
<186>Oct 13 16:48:08 201 1 HP
10IFNET/2/210231a64jx073000020:
log_type=port;content=Vlan-interface1
link status is DOWN.
<186>Oct 13 16:48:08 201 1 HP
10IFNET/2/210231a64jx073000020:
log_type=port;content=Line protocol on
the interface Vlan-interface1 is DOWN.
Severity
Debug
Debug
Debug
4.