Configuring Dns Tests; Configuring Ftp Tests - HP 6125G Configuration Manual

Step
1. Enter system view.
2. Enter NQA test group
view.
3. Configure the test type as
DHCP, and enter test type
view.
4. Specify an interface to
perform DHCP tests.
5. Configure optional
parameters.

Configuring DNS tests

DNS tests of an NQA test group are used to test whether the NQA client can translate a domain name
into an IP address through a DNS server and test the time required for resolution.
Before you start DNS tests, configure the mapping between a domain name and an IP address on a DNS
server.
A DNS test simulates the domain name resolution. It does not save the mapping between the domain
name and the IP address.
To configure DNS tests:
Step
1. Enter system view.
2. Enter NQA test group view.
3. Configure the test type as
DNS, and enter test type
view.
4. Specify the IP address of the
DNS server as the
destination address of DNS
packets.
5. Configure the domain name
that needs to be translated.
6. Configure optional
parameters.

Configuring FTP tests

FTP tests of an NQA test group are used to test the connection between the NQA client and an FTP server
and the time required for the FTP client to transfer a file to or download a file from the FTP server.
Command
system-view
nqa entry admin-name
operation-tag
type dhcp
operation interface
interface-type
interface-number
See "Configuring optional
parameters for an NQA test
group"
Command
system-view
nqa entry admin-name operation-tag
type dns
destination ip ip-address
resolve-target domain-name
See "Configuring optional
parameters for an NQA test
103
Remarks
N/A
N/A
N/A
By default, no interface is configured to
perform DHCP tests.
The specified interface must be up.
Otherwise, no probe packets can be sent out.
Optional.
Remarks
N/A
N/A
N/A
By default, no destination IP
address is configured.
By default, no domain name is
configured.
Optional.
group"