HP 6125G Configuration Manual page 20

Symmetric peers mode
Figure 8 Symmetric peers mode
In symmetric peers mode, devices that operate in symmetric active mode and symmetric passive mode
exchange NTP messages with the Mode field 3 (client mode) and 4 (server mode). Then the device that
operates in symmetric active mode periodically sends clock synchronization messages, with the Mode
field in the messages set to 1 (symmetric active). The device that receives the messages automatically
enters symmetric passive mode and sends a reply, with the Mode field in the message set to 2 (symmetric
passive). This exchange of messages establishes symmetric peers mode between the two devices, so the
two devices can synchronize, or be synchronized by, each other. If the clocks of both devices have been
synchronized, the device whose local clock has a lower stratum level synchronizes the other device.
Broadcast mode
Figure 9 Broadcast mode
In broadcast mode, a server periodically sends clock synchronization messages to broadcast address
255.255.255.255, with the Mode field in the messages set to 5 (broadcast mode). Clients listen to the
broadcast messages from servers. When a client receives the first broadcast message, the client and the
server start to exchange messages with the Mode field set to 3 (client mode) and 4 (server mode), to
calculate the network delay between client and the server. Then, the client enters broadcast client mode.
The client continues listening to broadcast messages, and synchronizes its local clock based on the
received broadcast messages.
13