Displaying And Maintaining Snmp - HP 6125G Configuration Manual

Network management and monitoring configuration guide
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Step
2.
Configure a target host.
3.
Configure the source address
for traps.
4.
Extend the standard
linkUp/linkDown traps.
5.
Configure the trap queue size.
6.
Configure the trap holding
time.

Displaying and maintaining SNMP

Task
Display SNMP agent system
information, including the contact,
physical location, and SNMP
version.
Display SNMP agent statistics.
Display the local engine ID.
Display SNMP group information.
Command
snmp-agent target-host trap
address udp-domain { ip-address |
ipv6 ipv6-address } [ udp-port
port-number ] [ dscp dscp-value ]
[ vpn-instance vpn-instance-name ]
params securityname
security-string [ v1 | v2c | v3
[ authentication | privacy ] ]
snmp-agent trap source
interface-type interface-number
snmp-agent trap if-mib link
extended
snmp-agent trap queue-size size
snmp-agent trap life seconds
Command
display snmp-agent sys-info [ contact | location
| version ]* [ | { begin | exclude | include }
regular-expression ]
display snmp-agent statistics [ | { begin |
exclude | include } regular-expression ]
display snmp-agent local-engineid [ | { begin |
exclude | include } regular-expression ]
display snmp-agent group [ group-name ] [ |
{ begin | exclude | include }
regular-expression ]
60
Remarks
If the trap destination is a host, the
ip-address argument must be the IP
address of the host.
Optional.
By default, SNMP chooses the IP
address of an interface to be the
source IP address of traps.
Optional.
By default, standard
linkUp/linkDown traps are used.
Extended linkUp/linkDown traps
add interface description and
interface type to standard
linkUp/linkDown traps. If the NMS
does not support extended SNMP
messages, use standard
linkUp/linkDown traps.
Optional.
The default trap queue size is 100.
When the trap queue is full, the
oldest traps are automatically
deleted for new traps.
Optional.
The default setting is 120 seconds.
A trap is deleted when its holding
time expires.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents