Dlsw Test Configuration Example - HP 6125G Configuration Manual

Voice results:
RTT number: 4000
One way results:
Voice scores:
NOTE:
The display nqa history command cannot show you the results of voice tests. To know the result of a voice
test, use the display nqa result command to view the probe results of the latest NQA test, or use the
display nqa statistics command to view the statistics of NQA tests.

DLSw test configuration example

Network requirements
As shown in
Figure 48 Network diagram
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
Min positive SD: 1
Max positive SD: 360
Positive SD number: 1030
Positive SD sum: 4363
Positive SD average: 4
Positive SD square sum: 497725
Min negative SD: 1
Max negative SD: 360
Negative SD number: 1028
Negative SD sum: 1028
Negative SD average: 4
Negative SD square sum: 495901
Max SD delay: 359
Min SD delay: 0
Number of SD delay: 4
Sum of SD delay: 1390
Square sum of SD delay: 483202
SD lost packet(s): 0
Lost packet(s) for unknown reason: 0
Max MOS value: 4.38
Max ICPIF value: 0
Figure 48, configure NQA DLSw tests to test the response time of the DLSw device.
Min positive DS: 1
Max positive DS: 1297
Positive DS number: 1024
Positive DS sum: 5423
Positive DS average: 5
Positive DS square sum: 2254957
Min negative DS: 1
Max negative DS: 1297
Negative DS number: 1022
Negative DS sum: 1022
Negative DS average: 5
Negative DS square sum: 5419
Max DS delay: 985
Min DS delay: 0
Number of DS delay: 4
Sum of DS delay: 1079
Square sum of DS delay: 973651
DS lost packet(s): 0
Min MOS value: 4.38
Min ICPIF value: 0
134