Yamaha SRCD User Manual page 139

F1
10) Press (SI01) to display the Qn+3.7
to Qn.0 and Im+3.7 to Im.0 status. Press
F2
(SI02) to display the Qn+7.7 to
Qn+4.0 and Im+7.7 to Im+4.0. Press
(WIO) to display the status of the remote
register.
11) Continue displaying the status of each se-
rial I/O.
F1
If (SI01) was pressed above in step
10), then the Qn+1.7 to Qn.0, Qn+3.7 to
Qn+2.0, Im+1.7 to Im.0 and Im+3.7 to
Im+2. status is displayed from the upper
row.
F2
If (SI02) was pressed above in step
10), then the Qn+5.7 to Qn+4.0, Qn+7.7
to Qn+6.0, Im+5.7 to Im+4.0 and Im+7.7
to Im+6. status is displayed from the up-
per row.
12) This is the screen when
pressed.
Each remote register will be displayed in
the hexadecimal mode.
(Each register is indicated with 4 charac-
ters.)
The top row displays the statuses of
QWn+14, QWn+12, QWn+10 and
QWn+8 from the left.
The 2nd row indicates the statuses of
QWn+22, QWn+20, QWn+18 and
QWn+16 from the left.
The 3rd row indicates the statuses of
IWm+14, IWm+12, IWm+10 and
IWm+8 from the left.
The bottom row indicates the statuses of
IWm+22, IWm+20, IWm+18 and
IWm+16 from the left.
13) Press the key to return to the screen
ESC
in step 10).
F3
F3
(WI0) is
133
CHAPTER2 PROFIBUS Unit
[OPRT-STEP] 100 0: 0
001:MOVA 254,100
[ 0.00,
1SI012SI023WIO
SI 00000000 00000000
00000000 00000000
SO 00000000 00000000
00000000 00000000
WI 00000000 00000000
FFFF1000 00000000
WO 00000000 00000000
00000000 00000000
[OPRT-STEP] 100 0: 0
001:MOVA 254,100
[ 0.00,
1SI012SI023WIO
0.00]
0.00]