Enter the adjustment mode by pressing
ADJUST and highlight Service. Press
ENTER to start up the service mode.
Highlight 'Common settings' and press
ENTER.
Highlight G2 adjust and press ENTER.
A safety notice will be displayed to
warn the operator.
5975069A BARCOVISION 708 200498
All manuals and user guides at all-guides.com
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
Source 1
Select with
then <ENTER>
<EXIT> to return.
ENTER starts up the service mode.
EXIT returns to operational mode.
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
Select with
then <ENTER>
<EXIT> to return.
ENTER starts up the Common settings
menu.
EXIT returns to the adjustment mode
menu.
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
Select with
then <ENTER>
<EXIT> to return.
or
or
or
B-1