Table of Contents
Advertisement
A
G2 ADJUSTMENT
Enter the adjustment mode by pressing ADJUST and highlight
Service. Press ENTER to start up the service mode.
Highlight 'Common settings' and press ENTER.
Highlight G2 adjust and press ENTER.
A safety notice will be displayed to warn the operator.
If you are qualified, press ENTER to continue with the G2 adjustment,
otherwise press EXIT to return to the service menu.
If ENTER is pressed, the G2 menu will be displayed.
5976026A BARCOVISION 708 200499
G2 Adjustment
ADJUSTMENT MODE
Select a path from below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with
or
SERVICE MODE
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with
or
then <ENTER>
<EXIT> to return.
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
I2C DIAGNOSTICS
Select with
or
SAFETY
then <ENTER>
NOTICE
<EXIT> to return.
RISK OF ELECTRICAL SHOCK
G2 ADJUSTMENT SHOULD
BE PERFORMED BY BARCO
PERSONNEL OR BARCO
AUTHORIZED DEALERS
IF QUALIFIED, PRESS
<ENTER> TO CONTINUE, OR
IF NOT, <EXIT> TO RETURN
G2 ADJUSTMENT
RED
ABL : ON
Select color with ç or è
<ENTER> to toggle ABL
<EXIT> to return.
A-1
Advertisement
Table of Contents
