Selecting An Approach - Garmin GTN 725 Pilot's Manual

6.4
Foreword
Only one approach can be loaded at a time in a flight plan. If an approach
is loaded when another approach is already in the active flight plan, the new
Getting
Started
approach replaces the previous approach. The route is defined by selection of an
Audio &
approach, the transition waypoint, and a runway.
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Available Departures
Proc
Charts
Available Approaches
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
6-10
Index

Selecting an Approach

1. Touch the PROC key on the Home page. The Approach,
Arrival, and Departure fields will be dashed until a selection
is made.
Touch To View
Touch To View
Available Arrivals
Touch To View
Figure 6-12 Procedures Selection Window
2. Touch the Approach key on the Procedures page to select
an approach for the destination airport. Confirm that the
intended airport is shown or touch the Airport key and select
the desired airport.
Garmin GTN 725/750 Pilot's Guide 190-01007-03 Rev. D