Selecting An Approach - Garmin GTN 725 Pilot's Manual

6.4

Selecting an Approach

Foreword
Only one approach can be loaded at a time in a flight plan. If an approach
is loaded when another approach is already in the active flight plan, the new
Getting
Started
approach replaces the previous approach. The route is defined by selection of an
Audio &
approach, the transition waypoint, and a runway.
Xpdr Ctrl
1. Touch the PROC key on the Home page. The Approach,
Com/Nav
FPL
Direct-To
Touch To View
Available Departures
Proc
Touch To View
Available Arrivals
Charts
Touch To View
Available Approaches
Wpt Info
Map
Traffic
Terrain
2. Touch the Approach key on the Procedures page to select
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
6-10
Index
190-01007-03-Final.indb 10
Arrival, and Departure fields will be dashed until a selection
is made.
Figure 6-12 Procedures Selection Window
an approach for the destination airport. Confirm that the
intended airport is shown or touch the Airport key and select
the desired airport.
Garmin GTN 725/750 Pilot's Guide 190-01007-03 Rev. J
7/9/2015 2:07:17 PM