Ads-B Traffic Menu; Ads-B Status; Tcas Status - Garmin GTN 725 Pilot's Manual

Hide thumbs Also See for GTN 725:

Table of Contents

The Traffic Menu allows control of the traffic information display.

Select TCAS Status:

Operate and Standby

Select ADS-B Status:

Off, Surface, or

Select Motion Vector:

Absolute, Relative, Off

ADS-B Status displays the current status of traffic application: Off, Surface,

or Airborne.

This shows the current status of the TCAS system. The modes reported by

the traffic device are "Operate" while in the air and "Standby" while on the

ground. This control allows the pilot to manually select the TCAS Status.

ADS-B Traffic Menu

Figure 10-11 ADS-B Traffic Menu

Touch the ADS-B Status key to toggle the ADS-B Status.

Touch the TCAS Status key to toggle the TCAS Status.

Garmin GTN 725/750 Pilot's Guide

Touch To Perform

Traffic Test

Select Altitude Filter:

Normal, Above, Below,

Unrestricted

Select Vector Duration:

30 sec, 1 min, 2 min,

190-01007-03 Rev. D

Show Quick Links

Table of Contents