Vectors To Final; Foreword 8 - Garmin GTN 725 Pilot's Manual

Hide thumbs Also See for GTN 725:

Table of Contents

With "Vectors-To-Final" (VTF) selected, the CDI needle remains off center

until you're established on the final approach course. With the approach

activated, the Map Page displays an extension of the final approach course in

magenta (remember, magenta is used to depict the active leg of the flight plan)

and "vtf" appears as part of the active leg on the Map page (as a reminder that

the approach was activated with vectors-to-final).

NOTE: Once VTF is activated all waypoints in the approach prior to the FAF

are removed.

Figure 6-19 DME Arc Example

Vectors to Final

Garmin GTN 725/750 Pilot's Guide

190-01007-03 Rev. D

Show Quick Links

Table of Contents