Setting A User-Configured (Manual) Nav Angle - Garmin GTN 725 Pilot's Manual

16.6.2
Foreword
There are three variation (heading) options: Magnetic, True, and User. If
Getting
"Magnetic" is selected, all track, course and heading information is corrected
Started
to the magnetic variation computed by the GPS receiver. The "True" setting
Audio &
references all information to true north. The "User" selection allows the pilot to
Xpdr Ctrl
enter values between 0º and 179º E or W.
Com/Nav
NOTE: When changing the Nav angle, the DTK on the Flight Plan page
for an approach does not change until that approach is reloaded.
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
16-26
Index

Setting a User-Configured (Manual) Nav Angle

1. While viewing the System page, touch Units key.
2. Touch the Nav Angle key and then the User key.
Figure 16-32 Nav Angle Selections
3. After User is selected, touch the Magnetic Variation key to
set the value.
Figure 16-33 Magnetic Variation is Available for Editing
Garmin GTN 725/750 Pilot's Guide
Touch to select User
(manual) mag var
Touch to set
manual mag var
190-01007-03 Rev. D