Tis System Status - Garmin GTN 725 Pilot's Manual

10.3.7
Foreword
The GTN 7XX performs an automatic test of TIS during power-up. If
Getting
TIS passes the test, TIS enters Standby Mode on the ground or Operating
Started
Mode in the air. If TIS fails the power up test, an annunciation is shown
Audio &
in the center of the Traffic Map Page. Contact a service center or Garmin
Xpdr Ctrl
dealer for corrective action for a failure message.
Com/Nav
Traffic Page
Annunciation
FPL
Direct-To
Proc
Unavailable
Charts
Wpt Info
The Traffic mode is annunciated in the bottom left corner of the Traffic Page.
When the aircraft is on the ground, TIS automatically enters Standby Mode.
Map
Once the aircraft is airborne, TIS switches to Operating Mode and traffic
information is displayed. The mode can be changed manually using the
Traffic
Traffic Status key.
Terrain
Traffic
Status
Weather
Nearest
TIS Operating
Services/
Music
TIS Standby
Utilities
TIS Failed*
System
* Contact a service center or Garmin dealer for corrective action
Messages
Symbols
Appendix
10-10
Index

TIS System Status

No Data
Data is not being received from the transponder
Failed
The transponder has failed
TIS is unavailable or out of range
Table 10-3 TIS Failure Annunciations
Traffic Mode Annunciation
(Traffic On Map Page)
Table 10-4 TIS Modes Shown on the Map Page
Garmin GTN 725/750 Pilot's Guide
Description
Operate
Standby
TIS Fail
Traffic Display
Enabled Icon
(Other Maps)
190-01007-03 Rev. D