Selecting An Approach - Garmin G3X Touch Pilot's Manual

Flight Planning

SELECTING AN APPROACH

When selecting an approach, it replaces the destination airport with the sequence
of waypoints for the selected approach. Keep in mind that the airport must have a
published approach (GPS, RNAV, VOR, NDB, localizer, or ILS) and only the final course
segment (final approach fix to missed approach point) of the published approach is
available (unless an external navigator is configured).
An approach can be selected from the Saved Flight Plan Page, Active Flight Plan
Page, and Direct-to Window, Waypoint (WPT) Page.
NOTE: The approach airport can be modified from the Select Approach
Window (Active Flight Plan Page > MENU > Approach). When this is done,
the approach is added but the destination airport is not. When removing
an approach (any active or loaded approach to an airport other than the
destination airport), the destination airport will be inserted at the end of the
flight plan.
Loading an approach from the saved flight plan page:
1) Press the MENU Key Twice.
2) Touch Flight Plan List.
3) Touch the desired saved flight plan.
4) Touch Edit.
5) Press the MENU Key.
6) Touch Select Approach.
7) Touch
8) Touch the desired approach.
9) Touch Select Approach.
Loading/Activating an approach from the active flight plan page:
1) Press the MENU Key.
2) Touch Select Approach.
3) Touch
4) Touch the desired approach.
5) Touch Load Approach.
Or:
188
to view a list of approaches.
to view a list of approaches.
Garmin G3X Touch Pilot's Guide 190-01754-00 Rev. L