Position Reporting - Garmin GTN 725 Pilot's Manual

Failed Message
Message Body
Touch To Delete
Message
14.4.7

Position Reporting

Position Reporting is a system which collects system variables and transmits
them over the Iridium
1. While viewing the Services page, touch the Position Reports
key.
Report Status
Touch To Enable
Automatic
Reporting
2. Touch the Automatic Reporting key to enable Automatic
Reporting.
3. After Automatic Reporting is enabled, touch the Report
Period key to set the Reporting Period.
4. Select the Report Period with the keypad and press Enter.
5. When Automatic Reporting is disabled, touch the Send Report
key to manually send a report.
190-01007-03 Rev. D
Figure 14-26 Resend a Failed SMS Text Message
® satellite at a given interval through the GSR 56.
Figure 14-27 Services Position Reporting
Garmin GTN 725/750 Pilot's Guide
Touch Resend
Message
Touch To Manually
Send A Report
Touch To Set
Automatic
Reporting Period
14-19
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index