Garmin GTN 725 Pilot's Manual page 185

4. Touch the Comment key to add a short comment for the new
waypoint.
5. Touch the Position Type key and then Lat/Lon,
Radial/Radial, or Radial/Distance to assign the type. See
the following instructions for more detail.
Touch to Select the
Desired Waypoint
Position Type
Figure 8-22 Waypoint Info - Create User Position Type
6. If desired, touch the Temporary? key to create the waypoint
for only temporary use. Temporary waypoints will be removed
when the power is cycled.
7. When finished with all selections, touch the Create key to
create the new waypoint.
NOTE: If an external Mark On Target (MOT) switch is installed, pressing
that switch will result in the creation of a User waypoint called MOTxxx
at the point in space where the MOT switch was pushed. The waypoints
are created in increasing numeric order up to number 999 at which point
they will start replacing existing waypoints at the beginning of the list.
190-01007-03 Rev. D Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
8-17
Index