Displaying Traffic On The Traffic Page; Altitude Display - Garmin GTN 725 Pilot's Manual

10.3.3
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
10.3.4
Direct-To
Proc
Charts
Wpt Info
Map
Traffic Selected Altitude Filter
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
10-6
Index

Displaying Traffic on the Traffic Page

1. From the Home page, touch the Traffic key.
2. Confirm TIS is in Operating Mode.
3. Touch the Traffic Status key to toggle between Operate and
Standby mode.

Altitude Display

1. While viewing the Traffic page, touch the Operate key to begin
displaying traffic. "Operate" is displayed in the Traffic Status
field.
2. Touch the Altitude Filter key to change the altitude volume.
Select the desired altitude volume by touching the BELOW,
NORMAL, ABOVE, or UNRESTRICTED keys. The selection
is displayed in the Altitude mode field.
Figure 10-6 Traffic Altitude Filter Page
Altitude Mode
Below
Normal
Above
Unrestricted
Table 10-2 Displayed Traffic Range
Garmin GTN 725/750 Pilot's Guide
Displayed Traffic Range
-9900 ft to 2700 ft
-2700 ft to 2700 ft
-2700 ft to 9900 ft
All Traffic Shown
190-01007-03 Rev. D