Selecting An Arrival; Weather - Garmin GTN 725 Pilot's Manual

6.3

Selecting an Arrival

A Standard Terminal Arrival (STAR) can be loaded at any airport that has one
published. Only one arrival can be loaded at a time in a flight plan. If an arrival
is loaded when another arrival is already in the active flight plan, the new arrival
replaces the previous arrival. The route is defined by selection of an arrival, the
transition waypoint, and a runway.
1. Touch the PROC key on the Home page and then touch the
Arrival key.
Touch To Select
Airport
2. Confirm that the intended airport is shown or touch the
Airport key and select the desired airport. Touch the key for
the desired Arrival.
Touch To Select
Arrival
190-01007-03 Rev. D
Figure 6-7 Arrival Page
Figure 6-8 Arrival List
Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
Direct-To
Touch To Show
Wpt Info
Arrival List

Weather

Nearest
Services/
Utilities
System
Messages
Symbols
Appendix
6-7
FPL
Proc
Charts
Map
Traffic
Terrain
Music
Index