Garmin GTN 725 Pilot's Manual page 498

Message
Foreword
CROSSFILL
Getting
ERROR - GTN
Started
Navigation DB
Audio &
mismatch. See
Xpdr Ctrl
CRG for crossfilled
Com/Nav
items.
CROSSFILL
FPL
STATUS - Crossfill
is turned off.
Direct-To
DATABASE -
Chart function
Proc
unavailable.
Charts
DATABASE -
Wpt Info
Chart database
valid until [DATE].
Map
Traffic
DATABASE -
A procedure has
Terrain
been modified in
a cataloged flight
Weather
plan.
Nearest
Services/
Music
DATABASE -
Utilities
Verify user-
modified
System
procedures in
stored flight plans
Messages
are correct.
Symbols
Appendix
17-6
Index
Description
The navigation
databases do not
match between GTNs
resulting in a loss
of communication
between two units.
Crossfill is turned off.
The GTN is configured
for ChartView or
FliteCharts and chart
verification has failed.
The GTN is configured
for ChartView or
FliteCharts and the
chart database has or is
about to expire.
A new database update
caused a procedure to
be truncated because
the flight plan now has
too many waypoints or
removed a procedure
because it no longer
exists in the database.
A stored flight plan
contains procedures
that have been
manually updated, and
a navigation database
update has occurred.
Garmin GTN 725/750 Pilot's Guide
Action
Check the specified database
version of both GTNs and ensure it
is up-to-date. Update the specified
database if needed.
No action.
Contact dealer for service.
Verify chart database expiration
date on the System – System
Status page. Update chart
database if necessary for
operations.
Verify stored cataloged flight plans
and procedures. Modify stored
flight plans and procedures as
necessary to include the current
procedures by re-loading those
procedures to the stored flight
plan routes.
Verify that the user-modified
procedures in stored flight plans
are correct.
190-01007-03 Rev. D