Enabling/Disabling The Display Of Copyright Information - 3Com 4500G Family Configuration Manual

Configuration
1, 2 and 3 or 1, 3
and 2
[1], 2, 3 and 1 or
[1], 3, 2 and 1

Enabling/Disabling the Display of Copyright Information

With the display of copyright information enabled, the copyright information is displayed when a
user logs in through Telnet or SSH, or when a user quits user view after logging in to the device
through the console port, AUX port, or VTY interface. The copyright information will not be
displayed under other circumstances. The display format of copyright information is as shown
below:
******************************************************************************
* Copyright (c) 2004-2010 3Com Corp. and its licensors. All rights reserved. *
* This software is protected by copyright law and international treaties.
* Without the prior written permission of 3Com Corporation and its licensors,*
* any reproduction republication, redistribution, decompiling, reverse
* engineering is strictly prohibited. Any unauthorized use of this software
* or any portion of it may result in severe civil and criminal penalties, and*
* will be prosecuted to the maximum extent possible under the applicable law.*
******************************************************************************
With the display of copyright information disabled, under no circumstances will the copyright
information be displayed.
Follow these steps to enable/disable the display of copyright information:
System clock displayed by the
display clock command
If the value of
"date-time"±"zone-offset" is not in the
summer-time range,
"date-time"±"zone-offset" is displayed.
If the value of
"date-time"±"zone-offset" is in the
summer-time range,
"date-time"±"zone-offset"+"summer-of
fset" is displayed.
If date-time is not in the daylight saving
time range, date-time is displayed.
date-time is in the daylight saving time
range:
If the value of
"date-time"-"summer-offset" is not in
the summer-time range,
"date-time"-"summer-offset" is
displayed;
If the value of
"date-time"-"summer-offset" is in the
summer-time range, date-time is
displayed.
Configure: clock datetime 1:00
2007/1/1, clock timezone zone-time
add 1 and clock summer-time ss
one-off 1:00 2007/1/1 1:00 2007/8/8 2
Display: 04:00:00 ss Mon 01/01/2007
Configure: clock timezone zone-time
add 1, clock summer-time ss one-off
1:00 2008/1/1 1:00 2008/8/8 2 and
clock datetime 1:00 2007/1/1
Display: 01:00:00 zone-time Mon
01/01/2007
Configure: clock timezone zone-time
add 1, clock summer-time ss one-off
1:00 2008/1/1 1:00 2008/8/8 2 and
clock datetime 1:30 2008/1/1
Display: 23:30:00 zone-time Mon
12/31/2007
Configure: clock timezone zone-time
add 1, clock summer-time ss one-off
1:00 2008/1/1 1:00 2008/8/8 2 and
clock datetime 3:00 2008/1/1
Display: 03:00:00 ss Tue 01/01/2008
1-6
Example
*
*
*