Set Date And Time Menu - Lexmark C746x User Manual

Understanding printer menus
Use
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of events to log
0–7

Set Date and Time menu

Set Date and Time menu items and descriptions
Use
Current Date and Time
Manually Set Date and Time
[input date/time]
Time Zone
[list of time zones]
Automatically observe DST
On
Off
Enable NTP
On
Off
To
Specify whether and how audit logs are created.
Notes:
•
Enable Audit determines if events are recorded in the secure audit log and
remote syslog. Yes is the factory default setting.
• Enable Remote Syslog determines if logs are sent to a remote server. No is the
factory default setting.
• Remote Syslog Facility determines the value used to send logs to the remote
syslog server. 4 is the factory default setting.
• Severity of events to log records the severity value of each event. 4 is the
factory default setting.
To
Show the current date and time settings for the printer.
Enter the date and time.
Notes:
• For touch‑screen printer models, date and time are set in YYYY-MM-DD
HH:MM format.
•
Manually setting the date and time sets Enable NTP to No.
• For non‑touch‑screen printer models, a wizard allows you to set the date and
time in YYYY‑MM‑DD‑HH:MM.
Select the time zone.
Note: GMT is the factory default setting.
Set the printer to use the applicable daylight saving time (DST) start and end times
associated with the printer Time Zone setting.
Note: On is the factory default setting.
Enable Network Time Protocol, which synchronizes the clocks of devices on a
network.
Notes:
• On is the factory default setting.
•
The setting is turned off if you manually set the date and time.
163