Using C748X; Learning About The Printer; Selecting A Location For The Printer - Lexmark C746x User Manual

Using C748x

Using C748x

Learning about the printer

Selecting a location for the printer

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any
options, then leave enough room for them also. It is important to:
•
Set up the printer near a properly grounded and easily accessible electrical outlet.
•
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee
156 standard.
•
Provide a flat, sturdy, and stable surface.
•
Keep the printer:
–
Clean, dry, and free of dust.
–
Away from stray staples and paper clips.
– Away from the direct airflow of air conditioners, heaters, or ventilators.
– Free from direct sunlight and humidity extremes.
•
Observe the recommended temperatures and avoid fluctuations:
Ambient temperature
Storage temperature
• Allow the following recommended amount of space around the printer for proper ventilation:
1 Right side 100 mm (3.9 in.)
2 Front 400 mm (15.7 in.)
15.6-32.2°C (60-90°F)
-40° to 40°C (-40 to 104°F)
3
2
5
4
1
81