Additional Printer Setup; Installing Internal Options; Available Internal Options - Lexmark C746x User Manual

Additional printer setup

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and
unplug any cables going into the printer.

Available internal options

•
Memory cards
–
Printer memory
–
Flash memory
–
Fonts
• Firmware cards
– Bar Code
–
IPDS
TM
–
PrintCryption
•
Printer hard disk
TM
•
Lexmark Internal Solutions Ports (ISP)
– RS‑232‑C Serial ISP
–
Parallel 1284‑B ISP
TM
–
MarkNet N8250 802.11 b/g/n Wireless ISP
–
MarkNet N8130 10/100 Fiber ISP
– MarkNet N8120 10/100/1000 Ethernet ISP
Note: An external kit is needed to support the ISP.
15