Lexmark C746x User Manual page 19

Additional printer setup
An optional memory card can be purchased separately and attached to the system board.
1
Access the system board.
For more information, see "Accessing the system board" on page 16.
Note: This task requires a flathead screwdriver.
2
Unpack the memory card.
Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may
cause damage.
3
Open the memory card connector latches.
4
Align the notch (1) on the memory card with the ridge (2) on the connector.
1
2
19