Internal Solutions Port Does Not Operate Correctly; Memory Card; Option Does Not Operate Correctly Or Quits After It Is Installed - Lexmark C746x User Manual

Troubleshooting
M
AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY
For more information on installing the network printing software, do the following:
1
Open the Software and Documentation CD.
2
Click Additional.
3
Under Publications on this CD, select Networking Guide.

Internal Solutions Port does not operate correctly

Try one or more of the following:
C I S
HECK THE NTERNAL
Make sure the ISP is securely connected to the printer system board.
C
HECK THE CABLE
Make sure you are using the correct cable and that it is securely connected to the Internal Solutions (ISP) port.
M
AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY
For information on installing the network printing software, see the Networking Guide on the Software and
Documentation CD.

Memory card

Make sure the memory card is securely connected to the printer system board.

Option does not operate correctly or quits after it is installed

Try one or more of the following:
R
ESET THE PRINTER
Turn the printer off, wait for about 10 seconds, and then turn the printer on.
C
HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER
1
Turn the printer off using the power switch.
2
Unplug the power cord from the wall outlet, and then from the printer.
3
Check the connection between the option and the printer.
M
AKE SURE THE OPTION IS INSTALLED CORRECTLY
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, then reinstall it. For more information, see the hardware setup documentation that came with the option, or
go to www.lexmark.com to view the option instruction sheet.
P (ISP)
OLUTIONS ORT CONNECTIONS
237