Cisco 8831 Administration Manual page 127

Remote monitoring
Item
DNS Server 1–5
Operational VLAN ID
Admin. VLAN ID
TFTP Server 1
TFTP Server 2
Alternate TFTP
Ethernet Configuration
CallManager 1–5
Information URL
Description
Primary Domain Name System (DNS) server (DNS Server 1) and optional
backup DNS servers (DNS Server 2–5) used by the conference phone.
Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco
Catalyst switch in which the conference phone is a member.
Auxiliary VLAN in which the conference phone is a member.
Primary Trivial File Transfer Protocol (TFTP) server used by the
conference phone.
Optional backup TFTP server that the conference phone uses if the primary
TFTP server is unavailable.
Indicates whether the conference phone is using an alternate TFTP server.
Speed and duplex of the Ethernet port (labeled LAN on the conference
phone).
Host names or IP addresses, in prioritized order, of the Cisco Unified
Communications Manager servers with which the conference phone can
register. An item can also show the IP address of a Survivable Remote
Site Telephony (SRST) router that is capable of providing limited Cisco
Unified Communications Manager functionality, if such a router is
available.
For an available server, an item will show the Cisco Unified
Communications Manager server IP address and one of the following
states:
An option may also include the SRST designation, which indicates an
SRST router capable of providing Cisco Unified Communications Manager
functionality with a limited feature set. This router assumes control of
call processing if all other Cisco Unified Communications Manager servers
become unreachable. The SRST Cisco Unified Communications Manager
always appears last in the list of servers, even if it is active. You configure
the SRST router address in the Device Pool section in Cisco Unified
Communications Manager.
URL of the help text that appears on the conference phone.
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
• Active: Cisco Unified Communications Manager server from which
the conference phone is currently receiving call-processing services.
• Standby: Cisco Unified Communications Manager server to which
the conference phone switches if the current server becomes
unavailable.
• Blank: No current connection to this Cisco Unified Communications
Manager.
Network Configuration area
117