Set Dhcp; Dns Server - Cisco 8831 Administration Manual

Cisco Unified IP Conference Phone 8831 settings
Option
DNS Server 1
Alternate TFTP
TFTP Server 1
TFTP Server 2
DHCP Address Released

Set DHCP

Procedure
Step 1 Unlock network configuration options.
Step 2 Choose Apps > Admin Settings > Network Configuration > DHCP Enabled.
Step 3
Set Enable to Yes. To disable DHCP, set Enable to No.
Step 4 Press Select, and then press Save.
Description
Primary Domain Name System (DNS)
server (DNS Server 1) and optional backup
DNS servers (DNS Server 2-5) used by the
phone.
Indicates whether the phone is using an
alternative TFTP server.
Primary Trivial File Transfer Protocol
(TFTP) server used by the phone. If you are
not using DHCP in your network and you
want to change this server, you must use the
TFTP Server 1 option.
If you set the Alternate TFTP option to yes,
you must enter a nonzero value for the TFTP
Server 1 option.
Optional backup TFTP server that the phone
uses if the primary TFTP server is
unavailable.
Releases the IP address assigned by DHCP.
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
Set DHCP
To Change
Set DNS server, on page 67
Set Alternate TFTP, on page
68
Set TFTP Server 1, on page 68
Set TFTP Server 2, on page 69
Release DHCP address, on
page 69
65