Set Up Softkey Templates; Enable Device Invoked Recording - Cisco 8831 Administration Manual

Set up softkey templates

Feature
Other Pickup
Quality Reporting
Tool
Redial
Remove Last
Conference
Participant
Resume
Speed Dial
Transfer
For more information, see Cisco Unified Communications Manager Administration Guide, "Softkey Template
Configuration" and the Cisco Unified Communications Manager System Guide, "Softkey Template".
Set up softkey templates
Procedure
Step 1 Log on to Cisco Unified Communications Manager Administration.
Step 2 Select Device > Device Settings > Softkey Template.
Step 3 To assign a softkey template to a conference station, choose Device > Phone to select the conference station.
Step 4 In the Phone Configuration window, select a softkey template from the Softkey Template drop-down list.

Enable Device Invoked Recording

Configure the Device Invoked Recording feature from Cisco Unified Communications Manager. To enable
this feature, perform the following steps.
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager
9.0
94
Configurable Softkeys in
the Softkey Template
configuration
Other Pickup (oPickup)
Quality Reporting Tool
(QRT)
Redial (Redial)
Remove Last Conference
Participant (Remove)
Resume (Resume)
SpeedDial
Transfer
Features, templates, services, and user setup
Supported as a Notes
Softkey
Yes Configure as a softkey.
Yes Configure Quality Reporting Tool as
a softkey.
Yes Phone displays Redial when Off
Hook.
Yes Phone displays Remove when a
participant is selected.
Yes —
Yes Phone displays Speed Dial.
Yes Phone displays Transfer when a call
is connected.