Ethernet Information Area - Cisco 8831 Administration Manual

Remote monitoring
Related Topics
Cisco Unified IP Conference Phone 8831 settings, on page 59

Ethernet Information area

The Ethernet Information area on a conference phone web page provides information about network traffic
on the conference phone, such as:
• Ethernet traffic
• Network traffic to and from the PC port on the conference phone
• Network traffic to and from the network port on the conference phone
To display the Ethernet Information area, access the web page for the conference phone as described in the
Access web page
The following table describes the information in the Ethernet Information area.
Table 32: Ethernet Information area items
Item
Rx error
Rx PacketNoDes
Rx Overruns
Rx alignErr
Rx length error
Rx symbol error
Rx CRC Errors
Rx Broadcasts
Rx Multicasts
Rx fail filter
Rx VLAN
Rx control frames
Rx unicast
section, and then click the Ethernet Information hyperlink.
Description
Total number of FCS error packets or Align error packets received.
Total number of shed packets caused by no DMA descriptor.
Total number of received packets dropped because of buffer overruns.
Total number of packets received between 64 and 1522 bytes in length
that have bad FCS errors.
Number of packets discarded due to improper length.
Number of valid length packets received that have at least one invalid data
symbol.
Total number of packets received with CRC failed.
Number of broadcast packets received by the conference phone.
Total number of multicast packets received by the conference phone.
Total number of packets received by the conference phone that failed.
Total number of packets received on the Virtual Local Area Network.
Total number of control frames received.
Total number of unicast packets received by the conference phone.
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0

Ethernet Information area

119