Device Information Area - Cisco 8831 Administration Manual

Remote monitoring
To enable or disable access to the web pages for a conference phone, follow these steps from Cisco Unified
Communications Manager Administration:
Procedure
Step 1 Choose Device > Phone.
Step 2 Specify the criteria to find the phone and click Find, or click Find to display a list of all phones.
Step 3
Click the device name to open the Phone Configuration web page for the device.
Step 4 In the Product Specific Configuration Layout area, from the Web Access drop-down list, choose Enabled or
Disabled.
Step 5
Click Update.
Note

Device Information area

The Device Information area on a conference phone web page displays device settings and related information
for the conference phone. The following table describes these items.
To display the Device Information area, access the web page for the conference phone as described in the
Access web page
Table 31: Device Information area items
Item
MAC Address
Host Name
DN
Version
Hardware Revision
Serial Number
Model Number
Message Waiting
Some features, such as Cisco Quality Report Tool, do not function properly without access to the
conference phone web pages. Disabling web access also affects any serviceability application that
relies on web access, such as CiscoWorks.
section, and then click the Device Information hyperlink.
Media Access Control (MAC) address of the conference phone.
Unique, fixed name that is automatically assigned to the conference phone
based on its MAC address.
Directory number assigned to the conference phone.
Version of the firmware running on the conference phone.
Revision value of the conference phone hardware.
Serial number of the conference phone.
Model number of the conference phone.
Indicates if there is a voice message waiting for this conference phone.
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0

Device Information area

115