Network Configuration Menu - Cisco 7975G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-1 Settings Configurable from the Phone (continued)
Category Description
VLAN settings
•
•
Port settings Allow you to set the speed and duplex of the
network and access ports.
Related Topics
•
•
•
•
•

Network Configuration Menu

The Network Configuration menu provides options for viewing and making a variety of network
settings.
For information about how to access the Network Configuration menu, see the
Configuration Menu" section on page
The phone also has a Network Configuration menu that you access directly from the Settings menu. For
Note
information about the options on that menu, see the
Before you can change an option on this menu, you must unlock options as described in the
and Locking Options" section on page
configuration options appear only if options are unlocked.
For information about the keys you can use to edit options, see the
Table 4-2 Network Configuration Menu Options
Option Description
DHCP Server IP address of the Dynamic Host
Configuration Protocol (DHCP) server
from which the phone obtains its IP address.
BOOTP Server Indicates whether the phone obtains its
configuration from a Bootstrap Protocol
(BootP) server instead of from a DHCP
server.
OL-12642-01
Admin. VLAN ID allows you to change the
administrative VLAN used by the phone.
PC VLAN allows PCs plugged in behind
the phone to interoperate with third-party
switches that do not strip VLAN tags on the
native VLAN for that port.
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-12
Table 4-2 describes these options and, where applicable, explains how to change them.
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
Network Configuration Menu
Option
Admin. VLAN ID
PC VLAN
SW Port Configuration
PC Port Configuration
4-2.
"Network Configuration" section on page
4-3. The Edit, Yes, or No softkeys for changing network
To Change
Display only—Cannot configure.
Display only—Cannot configure.
Network Configuration Menu
"Displaying a
"Unlocking
"Editing Values" section on page
4-29.
4-3.
4-5