Cisco 7975G Administration Manual page 117

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Multilevel Provides a method of prioritizing calls within
Precedence and your phone system. Use this feature when users
Preemption work in an environment where they need to
(MLPP) make and receive urgent or critical calls.
(SCCP phones
only)
Music-on- hold Plays music while callers are on hold.
Onhook call Allows a user to press a single Transfer softkey
transfer and then go onhook to complete a call transfer.
Other group pickup Allows a user to answer a call ringing on a
phone in another group that is associated with
the user's group.
Presence-enabled Allows a user to monitor the call state of
directories another directory number (DN) listed in call
logs, speed-dials, and corporate directories. The
Busy Lamp Field (BLF) for the DN displays the
call state.
Private Line The Cisco Unified Communications Manager
Automated administrator can configure a phone number
Ringdown (PLAR) that the Cisco Unified IP Phone dials as soon as
the handset goes off hook. This can be useful
(SIP phones only)
for phones that are designated for calling
emergency or "hotline" numbers.
OL-12642-01
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
Telephony Features Available for the Phone
Configuration Reference
For more information refer to
Cisco Unified
Communications Manager
Features and Services Guide,
"Multilevel Precedence and
Preemption" chapter.
For more information refer to
the Cisco Unified
Communications Manager
Features and Services Guide,
"Music On Hold" chapter.
For more information refer to
Cisco Unified
Communications Manager
System Guide, "Cisco Unified
IP Phones" chapter.
For more information refer to
the Cisco Unified
Communications Manager
Features and Services Guide,
"Call Pickup" chapter.
For more information, refer to
Cisco Unified
Communications Manager
Features and Services Guide,
"Directory Number
Configuration" chapter.
Refer to Cisco
Unified Communications
Manager System Guide, "SIP
Dial Rules Configuration"
chapter.
5-13