Cisco 7975G Administration Manual page 114

Telephony Features Available for the Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Fast Dial Service Allows a user to enter a Fast Dial code to place
a call. Fast Dial codes can be assigned to phone
numbers or Personal Address Book entries.
(See
Forced Controls the types of calls that certain users can
authorization codes place.
(FAC)
(SCCP phones
only)
Group call pickup Allows a user to answer a call ringing on a
phone in another group by using a group pickup
code.
Hold Allows the user to move a connected call from
an active state to a held state.
Hold Reversion Limits the amount of time that a call can be on
hold before reverting back to the phone that put
the call on hold and alerting the user.
Reverting calls are distinguished from
incoming calls by a single ring (or beep,
depending on the new call indicator setting for
the line). This notification repeats at intervals if
not resumed.
A call that triggers Hold Reversion also
displays an animated icon in the call bubble and
a brief message on the status line.
You can configure call focus priority to favor
incoming or reverting calls.
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
5-10
"Services" in this table.)
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information, refer to:
Cisco Unified
•
Communications Manager
Administration Guide,
"Cisco Unified IP Phone
Services Configuration"
chapter.
Cisco Unified
•
Communications Manager
System Guide, "Cisco
Unified IP Phone
Services" chapter.
For more information, refer to
the Cisco
Unified Communications
Manager Features and
Services Guide, "Client Matter
Codes and Forced
Authorization Codes" chapter.
For more information,
•
refer to the Cisco Unified
Communications Manager
Features and Services
Guide, "Call Pickup
Group" chapter.
Requires no configuration,
•
unless you want to use
music on hold. See
"Music-on-Hold" in this
table for information.
• See also: "Hold
Reversion" in this table.
For more information about
configuring this feature, refer
to Cisco Unified
Communications Manager
Features and Services Guide,
"Hold Reversion" chapter.
OL-12642-01